W5-48 High-Temperature Centrifugal Fan

The W5-48 series high-temperature fans are suitable for high-temperature gases that are non-corrosive, non-flammable, and have a maximum temperature not exceeding 700℃. The dust content of the gas should be less than 150 mg/m³.

Phone:86-400 - 6878 - 808, ext. 2| Email:cici@xhygk.com

Phone:86-400 - 6878 - 808, ext. 5| Email:wea@xhygk.com

Phone:86-400 - 6878 - 808, ext. 4| Email:wtb@xhygk.com

Email: jennifer@zcpc.net

Get a quote

Usage

The W5-48 series high-temperature fans are suitable for handling non-corrosive, non-flammable high-temperature gases with a maximum temperature not exceeding 700℃. The dust content of the gas should be less than 150 mg/m³.

Form

1. This series of fans consists of seven model numbers: 5.5, 6, 6.3, 9, 10, 11.5, and 12.5. The fans can be manufactured in both left-rotating and right-rotating types. When viewed from the end facing the motor, a fan with an impeller rotating clockwise is designated as a “right”-rotating fan; one rotating counterclockwise is designated as a “left”-rotating fan.

2. The position of the air outlet is indicated by the angle of the air outlet on the casing. Both “left” and “right” can be manufactured in five angles: 0°, 45°, 90°, 135°, and 180°.

3. This series of fans features either D-type or C-type transmission.

Structural features

① Impeller—welded from 12 blades, a conical front disk, and a flat rear disk; the material used is heat-resistant stainless steel.

② Housing — Made of high-quality galvanized steel sheet in a spiral shape.

③ Air inlet — A converging arc-shaped air inlet is used to minimize internal losses.

④ Adjustment gate — Equipped with an external transmission mechanism, it can be manually adjusted. Alternatively, it can also be adjusted by a rotary-position electric actuator according to user requirements.

Keywords:

W5-48 High-Temperature Centrifugal Fan

Category:

Industrial centrifugal fan

Recommended Products