W9-19 High-Temperature Centrifugal Fan

For conveying high-temperature gases that are non-corrosive, non-flammable, and have a maximum temperature not exceeding 700°C, the dust and hard particles contained in the medium shall not exceed 150 mg/m³.

Phone:86-400 - 6878 - 808, ext. 2| Email:cici@xhygk.com

Phone:86-400 - 6878 - 808, ext. 5| Email:wea@xhygk.com

Phone:86-400 - 6878 - 808, ext. 4| Email:wtb@xhygk.com

Email: jennifer@zcpc.net

Get a quote

Usage

Form

1. This series of fans features a single-inlet design.

2. This series of fans can be manufactured in both right-rotating and left-rotating types. When viewed from the motor end, if the impeller rotates clockwise, it is referred to as a right-rotating fan and denoted by “right”; if it rotates counterclockwise, it is referred to as a left-rotating fan and denoted by “left”.

3. The outlet position of the fan is indicated by the angle of the casing outlet. Both “left” and “right” can be configured in six angles: 0°, 45°, 90°, 135°, 180°, and 225°.

Structural features

① Impeller — It has 12 forward-curved blades, after the impeller is formed.

② Housing — Made of high-quality galvanized sheet metal in a spiral shape.

③ Air inlet—A streamlined, converging overall structure connected to the front cover assembly via bolts.

④ Transmission Assembly — Composed of a main shaft, water-cooled bearing housing, coupling, and other components. The main shaft is made of high-quality alloy steel, and the bearing housing features an integral water-cooling structure.

Keywords:

W9-19 High-Temperature Centrifugal Fan

Category:

Industrial centrifugal fan

Recommended Products