Scope of application
Honeycomb activated carbon box is widely used in electronic component production, battery (battery) production, pickling operation, laboratory exhaust, metallurgy, chemical industry, medicine, coating, food, brewing and furniture production, spray painting waste gas and other waste gas treatment, and has a good adsorption effect on various odors.
Product principle
Working principle of honeycomb activated carbon box: Dust-containing gas is powered by a fan, and positive or negative pressure enters the honeycomb activated carbon box. Since there are unbalanced and unsaturated molecular attraction or chemical bond forces on the solid surface of honeycomb activated carbon, when this solid surface comes into contact with gas, it can attract gas molecules, causing them to concentrate and remain on the solid surface, and pollutants are adsorbed. After the exhaust gas passes through the activated carbon box, it enters the equipment dust exhaust system, and the purified gas is discharged at high altitude to meet the standards.
Honeycomb activated carbon features
Honeycomb activated carbon has a large specific surface area, microporous structure, high adsorption capacity, and high surface activated carbon products, which are widely used in air pollution control. The honeycomb activated carbon adsorption method is selected, that is, the exhaust gas contacts with porous activated carbon with a large surface, and the pollutants in the exhaust gas are adsorbed and decomposed, thereby playing a purification role. The pollutants that can be removed to varying degrees by honeycomb activated carbon include: nitrogen oxides, carbon tetrachloride, chlorine, benzene, diformaldehyde, acetone, ethanol, ether, methanol, acetic acid, ethyl ester, styrene, odorous gases, etc. The modified honeycomb activated carbon treated with chemical reagents can remove: acid mist, alkaline mist, amines, mercaptans, sulfur dichloride, hydrogen sulfide, ammonia, mercury, carbon monochloride, dioxins, etc.
It is best to use honeycomb activated carbon to control air pollution. There are two adsorbers in parallel, which can be used to treat intermittent exhaust and dry continuous exhaust. One of them is for adsorption, and the other adsorber is for desorption and regeneration, and the desorbed pollutants are catalytically burned and discharged. When using honeycomb activated carbon, high temperature should be avoided as much as possible, because high temperature will reduce the adsorption amount, and the adsorption effect will decrease as the temperature rises. At the same time, high dust content in the gas should be avoided, because tar dust mist will block the pores of activated carbon, increase wind resistance, and reduce the adsorption effect. In this case, a dust filter should be installed in front of the honeycomb activated carbon to improve the effect and service life.
Technical parameters
Main ingredients: activated carbon, normal compressive strength greater than 0.8MPa; common specifications: 50*50*100mm, 100*100*100mm; operating temperature: less than 400 degrees Celsius; pore density: 100 holes/square inch, 150 holes/square inch; empty tower wind speed: 0.8m/s; specific surface area: greater than 700 square/g; appearance: the product surface is smooth and has no cracks.
Product Features
It is widely used in various organic waste gas purification systems with low concentration and large air volume. The treated waste gas can fully contact with the activated carbon when passing through the square holes of honeycomb activated carbon, and the adsorption effect can reach 67.16%. It has a small wind resistance coefficient and excellent adsorption, desorption and gas dynamics. It can be widely used to purify organic gases such as toluene, xylene, benzene, benzene, phenols, lipids, alcohols, aldehydes, etc., odorous gases and various gases containing trace metals. Environmental protection equipment using honeycomb activated carbon has high waste gas treatment and purification efficiency, small adsorption bed volume, low equipment energy consumption, can reduce construction cost and operating cost, and the purified gas fully meets the requirements of environmental protection emissions.
Features of activated carbon deodorizer, activated carbon filter, activated carbon filter box
1. No secondary pollution, truly environmentally friendly product;
2. Unique product structure, high purification rate, up to 85% or more;
3. Pure physical principle, no energy consumption, simple and convenient maintenance
Design air volume:
1000-50000m’/h
Note: The design can be customized according to the actual needs of the user.
